The biggest misconception about hydrogen is that it is making fuel with water. This is completely false and, if true, it would be in violation of certain laws of physics.
It is not possible to produce hydrogen at a speed that is sufficient to be used as the fuel of choice.
Hydrogen powered cars do exist. They are engineered to utilize Hydrogen as the primary fuel. Hydrogen is produced by a process that is pre-planned. Like every car needs a tank to transport gasoline the hydrogen is stored inside the cylinders of the vehicle.
Our equipment is a cost-effective retrofit, which is compatible with every size and type of vehicle.
Hydrogen aids in to improve the burning process for existing fuel. While you will benefit from substantial fuel savings, you’ll continue to require the fuel source that is used for primary use.
Hydrogen generators utilize the electricity generated by the battery in the vehicle to break down H2O (H2O) in its primary elements , hydrogen and oxygen. The hydrogen generated is in the air in the vehicle’s air stream to increase the efficiency of combustion and fuel efficiency.
In an engine that is standard the combustion process is extremely quick: 0.007 seconds. The majority of molecules of fuel are too massive to completely burn within the time frame of this.
The problem is compounded due to the fact that the spark plug ignites only an insignificant portion of fuel. The spark that is created must travel across the molecule of fuel to next one as it travels throughout the chambers of combustion. This takes up precious time.
Hydrogen ignites and is transported throughout the chamber of combustion 10 times quicker than gasoline flames. Hydrogen fills in the gaps between fuel molecules , and can cause them more closely. The flame moves faster, while the gas is exposed the flame more quickly and for longer periods of time. This results in better, cleaner burning.
The hydrogen can be thought of as a spark plug for your engine, igniting all fuel, instead of leaving the majority of it burning.
The technology behind the hydrogen car kit process has been thoroughly studied and is well is well understood. It has been established for over 30 years that adding hydrogen into fossil fuels that are burned by internal combustion engine, can improve efficiency of engines.
The design of HHO generators The importance of the quantity of plates
The most crucial features of the design of a dry cell is the amount of electrodes.
The effectiveness of a dry cell grows by the number of plates up to seven.
The seven plate design has six electrolysis reaction chambers in which there is a positive negative positive, as well as five neutral plates. Each chamber needs two Volts which is the reason the reason why a 12 Volt car is restricted to seven plates.
13, 18, etc. Dry cells on plates are multiple 6-chamber cells that are connected to form a unit. Each cell functions at 12 V.
It is the dimension of the surface of plate that acts as vital element for the generation of hydrogen and is the reason for an efficient, well-designed Hydrogen Cell.
Generators of Hydrogen HHO make use of the power of the battery in an automobile to break H2O (H2O) into Oxygen and Hydrogen. The gas that results is known as HHO. Hydrogen is created in the event that the motor of your vehicle gets started and is not stored within the system. In the moment that HHO is generated is the moment it is in the engine, which mixes with the existing fuel. The combination of HHO and fuel is burned more efficiently, which reduces consumption of fuel as well as the amount of pollutants released into the air.
Quantity of hydrogen required for dimension of the engine
How much hydrogen needed will be determined by the dimensions that the motor is.
0.15 Liters/minute for 1L of engine capacity is the best.
For instance, a 3L engine can produce the best results when a generator produces hydrogen at 0.5 L/minute.
Supplementation with hydrogen is subject to the law on diminishing returns.
The addition of hydrogen can boost the efficiency of the engine however, only up at a certain level.
Tests have proven that the process of flooding the engine with excessive Hydrogen increases the efficiency and performance of the engine.
The consumption of electricity by hydrogen generators
Just 7 to 10 amps are required to generate enough HHO for an engine of the standard 3L. The current draw is comparable that of turning off the sound.
The formula for this is Amps = Size of Engine (Litres) 2.5 2.5
Copyright Reseau Actu.