Skip to content
Home » 5 Steps to Complete a Noise Assessment

5 Steps to Complete a Noise Assessment

It’s sometimes difficult to know the moment when noise levels are too excessive or at a level which prolonged exposure may cause harm. Noise is subjective and everyone has different sensations. So, large amounts of noise can be tolerated in the workplace , without realizing the potential harms. A thorough noise assessment is the sole way to make sure your workplace is protected. The noise at work assessment provides you with the necessary information to ensure your workers are protected. But, it’s essential to follow the correct method to ensure that you have an accurate picture of the circumstances. Here’s ours…

5 Steps to Completely Finish the Noise Assessment

Five steps to finish your assessment of noise at Work Assessment.

1. Find the Primary Noise Sources

Take note of all the possible sources of noise at your workplace. Examine where and when the most significant noises take place. For instance specific processes could result in more noise at various periods. Take into consideration who the noise will be affecting, and who is at the highest exposure.

2. Monitor Noise Levels

Dosimeters can be used to gauge the level of noise in the workplace. Dosimeters for personal use should be placed on employees to permit more pertinent and valuable data to be collected. Based on this data you’ll be able assess the risk level in every workplace. Additionally, you will be able to identify who is the most at risk of exposure.

3. Implement Control Measures

If the noise levels are excessive, you’ll need to put in place control measures to minimize the impact of noise on the primary sources. The most efficient method to achieve this is to cut down on the amount of noise generated at the source. You could, for instance, employ a material to block out the noiseor put an obstruction between the source of noise and the surrounding surroundings. Or could there be a method to make the process less noise-producing? If you can reduce the amount of noise be sure to complete another noise analysis after you have made changes. If you are unable to take effective measures to control the source of noise it is necessary to give employees the proper hearing protection. Be aware that you must make use of industrial ear protectors that have the proper SNR rating to serve the purpose for which they were designed.

4. Recordings of Findings

After reviewing the situation and making any modifications, note your observations. It is important to realize that you’ll have to revisit this every few months so you can put a date into the diary for the next noise assessment. You may also have to conduct another evaluation of noise prior to the date in case there have been any significant changes in working procedures in the interim.

5. Receive expert assistance

You can carry out your own noise assessment in some workplace environments. However, the assistance of an expert is frequently required to ensure that the test is carried out correctly. It is usually difficult to gather the necessary information in large workplaces or that have more complicated operations. This could cause substantial mistakes in the evaluation. It is essential to ensure that your noise assessment is complete and completely completed to safeguard the employees and visitors in your workplace. In the end, it’s essential to minimize any risk by making sure your employees (and anyone who visits) are protected at work.